HVAC Service & Plumbers in Bluffton SC

Completed an HVAC repair on a Trane XR14 unit that was not cooling properly. Diagnosed a faulty capacitor and replaced it with a Trane OEM capacitor to restore functionality. Cleaned the condenser coils and checked the refrigerant levels, topping off with R-410A to ensure optimal cooling performance. Inspected and tightened all electrical connections for safety and efficiency. Regular maintenance and timely repairs are essential for system longevity. For professional HVAC repair services, contact us to keep your system running smoothly.

Resolved an HVAC issue by repairing a malfunctioning blower motor and replacing a dirty air filter. Used a specialized HVAC motor to ensure compatibility and efficiency. This fix restored proper airflow and temperature control throughout the system, enhancing the unit's performance and ensuring a comfortable indoor environment. Regular checks and maintenance are crucial for system longevity.

Repaired a Rheem Performance 50-gallon electric water heater today. Diagnosed faulty upper heating element using a multimeter. Drained tank using a submersible pump. Replaced upper element with a Rheem SP10261B model. Installed new Camco 02963 thermostat. Refilled tank and purged air from lines. Tested voltage and verified proper heating function with infrared thermometer.

Diagnosed faulty compressor in Carrier 24ABC6 central AC unit. Replaced compressor with new Copeland ZR61KCE-TF5-930 model. Evacuated system using Yellow Jacket 93560 vacuum pump. Recharged with R-410A refrigerant to manufacturer specifications. Installed new Honeywell RC1682 capacitor. Cleaned condenser coils with Nu-Calgon 4291-08 spray. Tested system operation and verified proper cooling performance.

I repaired a collapsed section of 8-inch clay sewer pipe today. Used a RIDGID SeeSnake camera to locate the damage. Excavated the area with a Bobcat mini-excavator. Removed the damaged pipe and replaced it with SDR 35 PVC pipe. Applied PVC primer and cement to joints. Backfilled trench with gravel and compacted soil. Tested flow with hydrostatic pressure test.

Cleared AC repair: Addressed compressor malfunction by replacing faulty start capacitor and conducting comprehensive voltage and ampere checks to validate operational integrity. Thoroughly inspected and cleansed condenser coils for optimal heat exchange, using a coil cleaner to remove accumulated debris and enhance efficiency. Verified refrigerant charge with a digital manifold gauge to ensure precise levels and calibrated thermostat settings for accurate temperature control. Completed final system test to confirm restored functionality and optimal cooling performance.

Replaced defective capacitor to restore compressor function, verified with amp probe readings. Conducted thorough inspection of evaporator coils for debris and mold buildup, cleaned with non-acidic solution to restore efficiency. Checked refrigerant levels with manifold gauge set, adjusted charge to manufacturer specifications. Calibrated thermostat settings and conducted airflow analysis to ensure consistent cooling throughout the home.

Sure, here's a rewritten post: Completed AC repair: Resolved compressor issues by replacing faulty capacitor and conducting voltage checks to ensure stable operation. Cleaned condenser coils to enhance heat transfer efficiency. Verified refrigerant charge using pressure gauges, ensuring optimal cooling performance. Tested thermostat calibration and airflow dynamics to achieve balanced temperature distribution. Conducted final system check for operational integrity and efficiency.

Out working this morning in Bluffton. I repaired a leaking shower head using a Moen replacement cartridge and a pipe wrench. I removed the old, faulty cartridge and installed the new one, ensuring a tight fit with plumber's tape. I tested the shower head for leaks and proper water flow, confirming the repair was successful and the issue resolved.

I cleared a clogged main sewer line using a camera inspection system. First, I ran the self-leveling Ridgid SeeSnake camera head through the 4" cast iron pipe to locate the blockage, which turned out to be a mass of roots about 50 feet from the cleanout. With the obstruction identified, I then utilized a Ridgid K-5208 drain cleaning machine with 5/8" x 100' cable and full rear bearing bulb auger to skillfully bore through and remove the rootmass. A final camera inspection confirmed the line was fully cleared. The homeowner's drain is now flowing freely again.

Today, I completed a sewer repair job using a RIDGID K-60 drain cleaning machine and a Spartan 300 cable machine. The job involved removing roots and debris obstructing the main sewer line. I utilized a high-pressure water jet to thoroughly clean the pipes, ensuring optimal flow and preventing future blockages.

I replaced the flush valve assembly in a Kohler Wellworth toilet today. The existing valve was sticking and causing the toilet to run constantly. I turned off the water supply, drained the tank, and removed the old valve using a flush valve socket wrench. The new Fluidmaster 504 valve was installed along with a fresh tank to bowl gasket. After reassembling and turning the water back on, the toilet now flushes properly with no running issues.

I performed a thorough duct cleaning service today. First, I used a Rotobrushed rotary brush system to loosen debris within the supply and return ductwork. Then, a truck-mounted Nikro vacuum unit with HEPA filtration powerfully extracted the loosened contaminants. Airduct Pro-34 sanitizing solution was fogged through the entire system to disinfect and deodorize. Homeowners can now breathe easier with clean ducts.

Today, I successfully installed a TOTO Drake II two-piece toilet and updated the bathroom plumbing. Additionally, I replaced a malfunctioning Moen Posi-Temp shower cartridge. The installation involved new wax rings, supply lines, and the use of a plumber's putty for sealing. I thoroughly tested all connections to ensure a flawless setup, improving the bathroom's functionality and water efficiency.

I performed annual maintenance in Bluffton, SC this morning on a Trane XR16 air conditioner. I cleaned the evaporator and condenser coils using a Nu-Calgon coil cleaner. The air filter was replaced with a new MERV 8 pleated filter. I checked refrigerant levels with a Yellowjacket manifold gauge set and added R-410A refrigerant as needed.

This morning in Bluffton, SC, I inspected a Daiken HVAC system with these findings: Return air 70°F, supply air 47°F for a good 23° temperature split. No external static pressure test needed for this manufactured home. The blower wheel, evaporator coil, and condenser fan run capacitor were clean/in working order. The compressor run capacitor was within tolerance range. No blower run capacitor present. Overall, the system is in great condition with temperatures and airflow within acceptable ranges. All components are functioning properly with no major issues or repairs needed currently.

This morning in Bluffton, SC, I successfully completed a water heater replacement, installing the energy-efficient Rinnai RL Series RUR199iN tankless system for a client. Despite the challenge of limited space, I managed to ensure a perfect fit. The client can now enjoy continuous hot water and improved energy efficiency, thanks to this upgrade.

I just completed the quarterly maintenance on the Trane XR14 outdoor air conditioning unit at the Smith residence. I inspected the condenser coils and found them to be clean. The Filtrete air filter inside the home was also in good condition. The unit is operating as expected and I anticipate no further problems.

Today, I repaired an A.O. Smith electric water heater in a residential home that was failing to produce hot water. The diagnostic revealed a burnt-out heating element and a faulty thermostat. I replaced both components and flushed the tank to remove sediment buildup, which improves efficiency and prolongs the unit's lifespan. I also adjusted the temperature settings to ensure safe and optimal operation. This repair restored consistent hot water supply and enhanced the system's overall performance.

I met with a customer today who was concerned about a persistent foul odor in their home's water supply. After investigating, I determined the issue was likely caused by bacteria growth in the water heater tank. I recommended installing a whole-house water filtration and purification system to effectively remove any contaminants and eliminate the unpleasant smell. I will return next week to complete the installation of the new Aquasana filter system, which will provide the customer with clean, fresh-smelling water throughout their home.

Today in Bluffton, South Carolina, we completed an upgrade for one of our clients, replacing their outdated 30-year-old HVAC system with a new, energy-efficient model. Specifically, we installed a Carrier Infinity 26ANB6 Performance Series HVAC unit, which offers significant improvements in energy savings and provides consistent comfort levels. Our team ensured a smooth transition for our valued client throughout the upgrade process.

I just completed a water heater replacement project for a client in Bluffton, SC. They chose to upgrade to a tankless system, namely the Rinnai RL Series RUR199iN. During installation, I was able to work around the restricted space available to ensure that everything fit nicely. The client may now enjoy uninterrupted hot water and better energy efficiency.

We recently replaced a homeowner's failing water heater with a larger, more energy-efficient unit. After examining the available space and needs, I installed the new unit, ensuring exact connections and excellent performance. It was extensively inspected and tested for leaks before providing operation and maintenance instructions.

Performed HVAC maintenance, including cleaning condenser coils, checking refrigerant levels, and inspecting air filters. Tightened electrical connections and lubricated moving parts for optimal performance. Conducted thermostat calibration and airflow assessment. Recommended scheduling regular maintenance to ensure system longevity and efficiency.