HVAC Service & Plumbers in Pooler GA

Fixed a leaky Moen Adler kitchen faucet by replacing the worn-out cartridge with a Moen 1225 replacement cartridge. Removed the handle and old cartridge, cleaned the valve body, and installed the new cartridge to ensure a secure fit. Reassembled the faucet and tested for leaks, confirming smooth operation and no drips. Regular maintenance and timely repairs prevent water waste and prolong fixture life. For professional plumbing services, contact us to keep your fixtures running efficiently.

Replaced the flush valve assembly in a Kohler Wellworth toilet. The existing valve was sticking and causing the toilet to run constantly. Turned off the water supply, drained the tank, and removed the old valve using a flush valve socket wrench. Installed a new Fluidmaster 504 valve along with a fresh tank-to-bowl gasket. After reassembly and restoring the water supply, the toilet now flushes properly with no running issues.

I repaired an AC unit by replacing a faulty start capacitor, checking voltage and ampere, cleaning condenser coils, using a digital manifold gauge, calibrating a thermostat, and conducting a final system test.

Completed air duct cleaning today in Pooler, GA. Utilized a high-powered vacuum and rotary brush system to remove dust and debris from ductwork. Inspected ducts for mold and mildew, treated affected areas with an EPA-approved antimicrobial agent. Sealed duct joints with mastic to prevent air leaks. Performed airflow testing using an anemometer to ensure optimal air distribution. Finalized service with a thorough inspection of the HVAC system to ensure improved indoor air quality and system efficiency.

Diagnosed and replaced a leaking evaporator coil, ensuring proper installation and sealing. Conducted a vacuum pump test to evacuate moisture from the system and recharged refrigerant to precise levels using a digital manifold gauge. Inspected and tightened electrical connections, and recalibrated the thermostat. Performed a comprehensive system test, including airflow verification and temperature differential checks, to confirm efficient and effective cooling operation.

I replaced the thermocouple and flushed the tank of a Rheem Performance Plus 40-gallon natural gas water heater for a client in Pooler, GA., model XG40T06EC36U1, this morning. This ensured efficient operation and heat transfer by removing sediment buildup.

This morning out doing an air duct cleaning for a customer in Pooler, GA. The customer was experiencing poor air quality and inadequate airflow in their home. This was particularly concerning for their child, who suffered from asthma. After a thorough cleaning of the air ducts, the air quality in the home will be significantly improved, helping to alleviate the symptoms of the child's asthma and restore the family's health.

Installed a Rinnai RU199iN tankless water heater for a satisfied customer in Pooler, GA. This model delivers continuous hot water efficiently. Advanced features allow precise temperature control. Its compact size and high performance promise improved comfort and energy savings. The customer now enjoys reliable hot water on demand.

Yesterday morning, I responded to a customer's call in Pooler, GA, where the AC unit was not blowing cool air. After performing a thorough inspection, I diagnosed the issue as a result of the Lennox cooling system's 13-year-old age and recommended a repair and annual maintenance tune-up. I cleared the drain lines, inspected the evaporator coils, and added refrigerant. I also replaced the air filters. By completing these maintenance tasks, I helped ensure the AC unit was operating efficiently, reducing the customer's future cooling costs and preparing the unit for the summer season.

I just finish resolving an HVAC issue by repairing a malfunctioning blower motor and replacing a dirty air filter. I used a specialized HVAC motor to ensure compatibility and efficiency. This fix restored proper airflow and temperature control throughout the system, enhancing the unit's performance and ensuring a comfortable indoor environment. Regular checks and maintenance are crucial for system longevity.

This afternoon, I visited a home in Pooler, GA to address an issue with the homeowner's Trane XR16 central heating and cooling system. After diagnosing the problem, I discovered a failed compressor contactor was preventing the air conditioner from starting properly. I carefully replaced the faulty contactor component and then tested the system to verify full cooling functionality had been restored. The homeowner now has their high-efficiency HVAC system operating reliably again.

Provided a complimentary assessment to homes considering a new HVAC system. We discussed installation options and anticipated energy efficiency gains, and we provided a complete quote. Ensured that all inquiries were addressed clearly in order to support informed decision-making.

Executing HVAC maintenance in Pooler, GA involved inspecting components, cleaning coils, and replacing air filters. During inspection, I discovered a refrigerant leak, so I repaired that to restore system efficiency and stop any more issues.

I resolved a drainage issue in Pooler, GA by removing an obstruction from the HVAC system's drain pipe. During inspection, I noticed a faulty contactor relay in the outdoor unit. I replaced it and it is running great now, customer is happy!

Just wrapped up an HVAC repair in Pooler, GA. Identified a faulty capacitor in a Goodman GSX16 air conditioner causing intermittent cooling. Replacement restored consistent cooling performance. Ensured all connections were secure and conducted thorough testing for optimal function.

Just completed a water heater replacement for a wonderful client in Pooler, GA. Client wanted an upgrade to a tankless system, a Navien NPE-240A. Overcame minor space constraints during installation, ensuring seamless integration. Now, endless hot water and enhanced energy efficiency await!

Visited a residence in Pooler, GA to clear a drain blockage. Employed a drain auger to remove the obstruction and conducted tests to verify optimal drainage. Offered maintenance advice to prevent future issues. Keeping drains flowing smoothly and clients informed about upkeep essentials.

Addressed a call concerning a malfunctioning toilet in Pooler, GA. Diagnosed a faulty flush valve and replaced it. Performed a comprehensive inspection to verify the toilet's proper functionality. Everything is running well!

Visited the home in Pooler, GA to offer a complimentary heat pump assessment. Discussed the advantages of heat pump systems, assessed the property, and provided a detailed quote. Addressed all client inquiries thoroughly.

This morning, I was working on an HVAC heating repair for a fantastic client in Pooler, Georgia. I fixed a 5-year-old Carrier Infinity Series Model XYZ123 that was not working properly. We discovered that the heating problem was caused by a malfunctioning igniter. Replaced it quickly with a quality igniter to restore full functionality. Conducted thorough system checks to verify everything is in working order. Your home is now pleasant and warm again!

On the job tackling a stubborn clogged drain in Pooler, GA. Identified a buildup of grease and debris causing the blockage. I used a drain snake to break through the obstruction and clear the pipe. Thoroughly inspected for any residual issues and ensured smooth water flow.

Rescued a customer in Pooler, GA with no heat! I quickly Identified a faulty igniter causing the issue. Replaced the defective part with no complications, ensuring efficient heating. Conducted a thorough inspection for any additional concerns; did not see anything else. Now, the heating system is back in action, providing warmth during chilly days.

Completed the installation of a new water heater for a homeowner experiencing constant issues with their old unit. After assessing the space and discussing the homeowner's hot water needs, we decided on a more energy-efficient and larger capacity water heater. The installation involved careful removal of the old unit, followed by precise connections and adjustments to ensure optimal performance. I double-checked for any potential leaks or issues and tested the new water heater thoroughly before providing the homeowner with instructions on its operation. Additionally, I offered advice on routine maintenance to extend the life of the unit.